Proff Lye
Proff Lye may be used on all kind of soft wood such as pine, pitch pine and spruce. It prevents soft wood from going yellow and ensures that the wood remains light. After lye application, the woodwork needs Proff Oil or Proff Wood Floor Soap treatment for protection. It is important that the yellowing process has not already started before application of the lye. Wall and ceiling panels should be lye treated before mounting due to corrosive material. If Proff Lye is used on Oak wood it produces a smoked thermo-treated colour.
Work Instruction:
1. The surface of the wood must be completely dry and free from dirt and grease. The surface should be freshly sanded before application.
2. Shake the bottle well and pour material into plastic bucket and stir well so that all pigments and lime are evenly distributed in material.
3. Use goggles and gloves for protection. Lye is corrosive.
4. Apply lye in an even layer lengthwise of the boards using an acid proof brush.
5. Stir material regularly during application.
6. Use 1 liter of lye to 8 - 10m2 of floor or panel.
7. Clean tools with water.
8. After basic priming with lye, a finishing treatment is required. Wait for 6 hours after application before surface is cleaned with Proff Intensive Wood Cleaner to remove excess pigments and lime from surface.
9. Leave for drying before application of Proff Proff Oil white or other colour.
Declaration of content:
Warning label:
Consumption: 1 liter to 8 – 10m2 of woodwork
- Disposal: Empty containers and product residue disposed of according to regional rules and regulations.
- In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
- In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Storage: Keep in tightly closed original packaging. Do not expose to heat (e.g. sunlight). Store frost-free, and out the reach of children.
- Disposal: Empty containers and product residue disposed of according to regional rules and regulations.
- Note!! Please always make a test coat on the surface to check the compatibility.